Filter By:
Stems

$34.00
3D-forged and CNC-machined AL6061/T6 mountain bike stem.
- 4-bolt cold-forged alloy faceplate
- Chromoly hardware
- 40mm fork clamp stack height

$30.00 - $36.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

$64.99
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer, and more with Blendr Elite accessory integration.
- Seamless accessory integration with Blendr Elite
- 6061-T6, 3D, forged alloy construction
- 4-bolt dual band clamp retains stiffness and reduces weight
- Opposing 2-bolt steerer tube clamp
- Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec
- Approved for carbon bars and steerer tubes
- Includes one Blendr base to integrate Ion lights and Trip computers

$67.99
The perfect fit
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer and more with Blendr accessory integration.
Product details
- Blendr Elite allows seamless accessory integration
- 4-bolt dual band clamp retains stiffness and reduces weight
- Opposing 2-bolt steerer tube clamp
- Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec
- Approved for carbon bars and steerer tubes
- Suitable for both MTB or road use
- Includes Blendr mono base and accessory mounts

$120.99
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike.
- Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems
- 4-bolt dual band clamp securely holds handlebar
- Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec
- Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts
- Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories
- Approved for carbon bars and steerer tubes
- Safe installation requires 5mm spacer above and below stem
- Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount

$18.99
Genuine replacement parts
Keep your bike operating as it should.
- Quill stem for threaded forks
- Hardware included

$35.00
Fully integrated.
A convenient mount on the stem securely holds SP-Connect compatible smartphone cases and adhesive mounts to put all of your data in an optimal position.
Where it thrives:
The open road, leisurely rides, in town
What it's built for:
Compatibility, durability
Highlights:
- Compatible with SP Connect smartphone cases and adhesive mounts
- Integrated mount
- Range of sizes

$65.00
Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride.
- Sleek styling with maximum strength and stiffness
- Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong
- 31.8mm clamp interface
- Weight: 185 grams (100mm length)

$150.00
Waste not, want KNØT.
Part of the KNØT SystemBar, this aluminum stem helps save six watts over a traditional round handlebar. Not only that, you can adjust the bar position. Have cake. Eat cake.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, control
Highlights:
- One-piece looks, two-piece function
- Wind tunnel proven, hides cables
- Compatible with 2019+SuperSix EVO

$150.00
System = speed.
Paired with the SAVE or KNØT SystemBar, you end up with the speed and good looks of a one-piece system with the adjustability of a two-piece.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, efficiency
Highlights:
- Integrated computer mount
- Compatible with most bicycles
- One-piece looks, Two-piece function

$55.00
Descend with confidence.
The perfect match for any trail or enduro bike paired with the HollowGram SAVE Riser 35mm handlebar for increased descending prowess.
Where it thrives:
Challenging trails, down hills
What it's built for:
Control, confidence
Highlights:
- 35mm clamp size
- 37mm length
- 0° degrees rise

$55.00
The workhorse.
Whether you're upgrading your stock parts or looking for something a bit more eye catching, the alloy ONE stem delivers.
Where it thrives:
The open road, gravel roads, up and down hills
What it's built for:
Agility, control
Highlights:
- Lightweight aluminum construction
- Wide range of sizes
- Eye-catching and sleek design

$30.99
The Bontrager Comp 31.8 stem is Blendr ready and provides a secure and confident connection to 31.8 handlebars for road, city, and mountain bikes.
- 6061-T6 cast body construction
- 4-bolt dual band clamp retains stiffness and reduces weight
- Opposing 2-bolt steerer tube clamp with M5 corrosion resistant steel bolts
- Blendr ready for seamless accessory integration
- Compatible with Blendr Elite bases and Blendr mounts
- Suitable for use on a road, city, or mountain bike
- Safe for use on carbon steerer tubes and handlebars

$49.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride.
Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;

$91.99
Make sure your fit is dialed in your race against the clock! Bontrager's Speed Concept Stem allows you to set up your Speed Concept bike for proper ergonomics and aerodynamics. Plus, the precisely integrated design keeps your super aero bike fast and looking pro!
- Low-Near = 17° rise / 77mm length
- Low-Far = 100° rise / 110mm length
- Mid-Near = 50° rise / 67mm length
- Mid-Far = 45° rise / 110mm length
- High-Near = 80° rise / 67mm length
- High-Far = 75° rise / 110mm length

$599.99
Original equipment integrated bar/stem combo for 2016+ Trek Madone 9 series bikes.
- Not compatible with other bikes
- Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops
- 100% OCLV carbon fiber construction
- Seamless integration with Blendr accessory bases and mounts, sold separately
Page 1 of 1